The use elements of hydraulic pile driver

Edit:Yantai Hawk Hydraulic Equipment Co., Ltd.UpDate:2021-05-10

  Hydraulic pile driverThe use of the operating staff requires flexible use of operating process methods, adequate operating process specifications, structural features, and installation and processing technology of new facilities. This is so easy to ensure all normal operating processes, sufficient low-speed gears and some sudden common faults immediately The low-speed gear can damage the equipment in the low-speed gear and maintain the excellent operation of the equipment.

However, the general operation steps of the operation process are obviously insufficient. Some elements of the operation steps should also pay attention to the following aspects at low gears:

1. The operation of the pile driver should be accelerated from low gear to high speed.

2. The rotation rate has been set long after the machine, about 10 revolutions per minute. Do not adjust the rotation rate casually. Too fast will easily lead to unstable clamping of the supporting pile and cause risky things.

3. When the pile driver is running, there must be professional guidance. Instruct staff and use staff to check data signals with each other before operation. Work closely together.

4. When the pile is erected and landing, first check whether the hoist drum is reliable, and then follow the procedures required in the instructions for lifting and landing.

5. If you use a pile clamp, you must first clamp the pile before working. Do not loosen the pile clamp during work.

6. Calibrate the flatness of the pile immediately when sinking the pile. After the pile enters the soil 3M, it is prohibited to use the pile machine to move or rotate to calibrate the flatness of the pile.

7. Pile frame poles that cannot be skewed to the left and right. When adjusting the poles before and after they should be skewed, they must be driven to the left and right together.

The hydraulic piling machine adopts hydraulic steering system, which is flexible in steering. The hydraulic system is mainly used, which is convenient to use, high efficiency, environmental protection and energy saving. The excellent characteristics of the entire equipment can better achieve the desired work effect.