行业知识
Introduction to the characteristics and functions of crushing pliers
Crushing pliers are also known as multi-purpose cutting machines, hydraulic pliers, hydraulic crushing shears, etc. It is widely used in the demolition of reinforced concrete in buildings and other buildings, and can also be used to bend steel bars and load them. Get on the car, it can also flexibly tow, transport and arrange the building demolition sundries such as steel bars. Let's take a look at the functions and characteristics of this equipment.
1, function
The working efficiency of the crushing pliers is very high, which is 2-4 times that of the breaking hammer. If it is equipped with a steel bar cutter, it can perform two operations of concrete crushing and steel bar cutting at the same time, and it can also realize fully mechanized and unmanned operation. There is no need for personnel to participate at all, which greatly improves the safety of construction.
Crushing pliers can also reduce noise and vibration by squeezing to meet environmental protection requirements, and are important tools in urban construction.
2, Features
Now that the degree of mechanization is getting higher and higher, the appearance of crushing pliers has greatly liberated manpower, improved work efficiency, reduced construction costs and hidden safety hazards, and also made up for the deficiencies of other machines in some aspects. The occurrence of construction noise and vibration can be reduced during the event.
(1) Simple installation
The installation principle of the crushing pliers is basically the same as that of the breaking hammer, which is relatively simple. Just connect the pin hole to the pin hole at the front end of the excavator, and then connect it to the pipeline on the excavator, and then it can be put into use. .
(2) Design concept
Maintenance is very important for any equipment. The crushing pliers produced by our company have paid great attention to the design of the oil circuit, which not only improves the working efficiency of the oil cylinder, but also facilitates disassembly and maintenance; In addition, our company has also set up protection devices for key parts such as the oil cylinder to avoid splashing or damaging the oil cylinder due to reinforced concrete during use.
Related Industry Knowledge
- Hydraulic pile driver sometimes has some problems. What causes this?
- How to detect the failure of excavator hydraulic wood grabber circuit
- How to properly maintain a hydraulic shredder in the hot summer
- Cleaning agents commonly used for maintenance of hydraulic pile drivers
- Understanding the major misunderstandings of hydraulic pile driver lubricants
- Today's used hydraulic shredders are a mixed bag and need attention
- Pay attention to the aspects of hydraulic pile driver
- How to solve the oil leakage phenomenon of the silent breaker?
- Load detection method of silent breaker
- What are the benefits of the crushing tongs to the excavator?
- The difference between hydraulic pile driver and diesel hammer pile driver
- How to choose excavator vibration compactor
- What should I do if the gear oil of the hydraulic pile driver heats up too fast?
- What should we pay attention to when using electricity for hydraulic pile drivers?
- The difference between hydraulic pile driver and diesel hammer pile driver
- Hydraulic pile driver manufacturer|Can the road pile driver be retractable?
- Why does hydraulic pile driver have oil discoloration
- Types and principles of hydraulic pile drivers
- Maintenance management mode of hydraulic pile driver
- Precautions for hydraulic pile driver operation