新闻详情
The evolution process of scrap pliers
With the gradual increase of industrial equipment and fee-paying cars, the amount of tasks that must be dismantled and laser cutting is slowly increasing. Scrap car dismantling plants generally use manual laser cutting methods for disposal, and manpower is invested in the disassembly process. Large, low safety performance, too much investment in the process of recycling and disassembly, material separation, slow speed, increased costs, and also contains corresponding risk factors. Hazardous waste management generally has some new weaknesses that must be effectively strengthened, especially the dismantling of scrapped vehicles that the public has strongly reported. Now the emergence of scrap pliers has completely solved this difficulty for everyone, and it is an artifact in the recycling and disassembly of scrap equipment.
In the evolution of special tools for disassembly, the crocodile cutting machine and scrap steel shearing machine are all special tools that have greatly assisted the field of mechanical equipment disassembly during a period of technological application development. The olecranon pliers are installed in Used on the excavator, it can work in all directions. It can disconnect the scrap steel, H channel steel, car tires, scrapped cars, stainless steel plate cutting for house dismantling, and various scrap metal recycling and disposal. It belongs to the excavator attachment. Compared with manual laser cutting, the cost is reduced, the safety factor is improved, and it is more in line with environmental protection regulations.
Supported by the current technological innovation, the new design product of the car dismantling pliers is an improvement on the current machine structure, and the two-cylinder hydraulic shear is developed for the cutting of stainless steel plates with a cemented carbide turning tool. The shear stress is large. It is higher than the same series of olecranon shears, which improves the construction speed of the project and meets the customer's requirements for the recycling of strong and strong scrap metal such as strong and thick steel plates. It can be used in different practical operations, such as dismantling old cars, cutting building steel bars, stainless steel plates, tanks, pipes, including light and thin steel frame structures, and scrap steel disposal.
Related News
- Today car disassembly machines have gradually replaced manual disassembly
- Introduction of car tongs to reduce fuel consumption and prevent bolts from loosening
- What are the problems with the gears of the hydraulic pile driver?
- Today, talk about some common problems of hydraulic pile driver
- How to do the maintenance work of hydraulic steel grab
- What do users think of hydraulic wood grabbers today?
- Do you know any advantages of crushing tongs?
- The intermittent causes and solutions of the impact crushing force of the silent breaker
- Some problems and maintenance methods that Yingzui hydraulic shears may encounter
- Introduction to some basic knowledge of excavator vibration tamping
- Maintenance misunderstanding of hydraulic pile driver in winter
- What are the factors that cause the low oil pressure of the hydraulic pile driver
- Understand the role of excavator olecranon hydraulic shear
- Automobile dismantling machine manufacturers explain the fuel-saving techniques of excavators
- The initial running-in of the hydraulic feller is very important
- What to do if the car dismantling machine fails to catch fire when working
- How to control the working pressure of the car scraper during use
- Introduction to the use and assembly of hydraulic steel grabber
- The advantages of hydraulic wood grabber and the amount of use during the running-in period
- Why does the hydraulic cylinder of the hydraulic piling machine change color?