The advantages of hydraulic wood grabber and the amount of use during the running-in period

The streamlined design of the hydraulic wood grabber is beautiful and generous, with strong power, reliable work and high efficiency and energy saving. The working device is automatically leveled, with high efficiency and computer optimized design. The advantages of wood grabber are high rated load mass, high bucket capacity, high discharge height, bucket width, large digging force, small wheelbase and wheelbase, small clearance, light weight, low rated power and compact size.

Due to the influence of the processing, assembly and adjustment of new parts such as grabbers, the friction surface is rough, the contact area of ​​the mating surface is small, and the surface pressure is uneven. During the operation of the machine, the uneven parts on the surface of the parts cooperate with each other, and the metal fragments continue to participate in the friction as abrasives, which accelerates the wear of the parts and the surface. Therefore, the running-in period is easy to cause the parts to wear and the wear rate is fast. At this time, if the overload is operated, it may cause damage to the parts and cause early failure.

The running-in period is an important link to ensure the normal operation of the fork wood machine and the fork mower, reduce the failure rate, and extend the service life. But at present, some users have neglected the special technical requirements for the running-in period of the new machine due to lack of common sense in the use of fork wood machines or due to tight time or hope to obtain profits as soon as possible. Some users even think that, no matter what, the manufacturer has been repaired, the machine is broken and the manufacturer is responsible for maintenance, so the machine is overloaded and put into use for a long time during the running-in period, resulting in frequent occurrence of early machine failures, which not only affects the normal use of the machine, but also shortens The service life of the machine is also affected by the damage of the machine.