Home > news > Content

Maintenance of cleaning agent for hydraulic pile driver

As a mechanical equipment, the hydraulic pile driver is bound to be damaged by long-term operation. Therefore, it is necessary to clean and maintain the hydraulic pile driver in time. So what kind of cleaning agent should be used?

1. Organic solvents

It is more common in motor oil, light diesel, gasoline, acetone, alcohol and trichloroethylene. Dissolving oil in this way, all kinds of grease can be dissolved. The advantages are that it does not generate heat, is easy to use, does not damage the metal, and has a good cleaning effect. However, rubber parts cannot be cleaned with organic solvents.

2. Chemical cleaning liquid

It is a chemically synthesized water-based metal cleaning agent, equipped with an aqueous solution, with metal cleaning agent as the main surface active agent, with strong decontamination ability. In addition, there are some additives in the cleaning agent, which can promote or increase the general functions of the metal cleaning agent's anti-corrosion, rust prevention, and carbon removal. The principle is to first clean the surface part wetted by the liquid mixture with a detergent, and then enter the contact interface part between the dirt and the surface. The dust on this part of the surface will fall, or the part of the surface will form an emulsion and hang to achieve the purpose of cleaning.

3. Alkaline solution

Alkaline solutions are aqueous solutions of alkaline or alkaline salts. Use an emulsifier to emulsify and remove oil from unsaponifiable oil. It is a widely used decontamination cleaning fluid. It should be noted that parts of different materials should be cleaned with different cleaning fluids. Alkaline solutions have different degrees of corrosion to metals, especially to aluminum. After degreasing, wash away the residual lye on the surface with hot water to prevent corrosion of the parts.